X

 

G

UEST

REGISTRATION

 

 

 

or

 

 
CREATE ACCOUNT

 

O

WNER

REGISTRATION

 

 
Do you own or did you order a Ferrari?
Register and gain access to the Owners' section, where you will find all the services dedicated you.
REGISTER NOW

 

M

EMBER

REGISTRATION

 

 
Do you own or did you order a Ferrari?
Register and gain access to the Owners' section, where you will find all the services dedicated you.
REGISTER NOW
 

Overview

OVER 30 INTERNATIONAL AWARDS

THE FERRARI 458 ITALIA CONTINUES TO GO FROM STRENGTH TO STRENGTH AND HAS GARNERED OVER 30 INTERNATIONAL AWARDS IN ITS SHORT CAREER.

It added two further plaudits to that collection at the International Engine of the Year Awards when its V8 was voted “Best Performance Engine” and “Best Engine Above 4 Litres”.

458 italia
PHOTOGALLERY

Read more

The success being enjoyed by the 458 Italia with both critics and public alike crosses all borders– it has won awards in a host of different nations from the USA to the Far East and Europe. In the US, the mid-rear V8 was named "World Performance Car of the Year". It was also named “Car of the Year” by the Robb Report and topped the New York Times rankings.
On the other side of the Atlantic, the discerning British motoring media proved equally enthusiastic. In fact, the 458 Italia scooped both BBC Top Gear Magazine’s “Supercar of the Year” and “Car of the Year Awards”. Staying in Britain, CAR magazine also named the 458 Italia “Performance Car of the Year 2010”, as did Auto Express and What Car.


IT TRIUMPHED TOO AS THE DAILY TELEGRAPH’S «CAR OF THE YEAR» AND TV PROGRAMME FIFTH GEAR’S «FAST CAR OF THE YEAR»

The 458 Italia also enjoyed an enthusiastic welcome from the German and Italian public with the result that it voted “Sports Car of the Year” by the highly reputable Auto Moto und Sport and Quattroruote magazines.

Continuing around the world, the authoritative Car Middle East magazine declared the 458 Italia both “Car of the Year” and “Supercar of the Year” also. In China, Top Gear, Auto Moto und Sport, Robb Report and the popular X-Car website all named it “Car of the Year”.

Lastly, in Japan, the 458 Italia was Engine’s "Best Car of the Year", proving that the Ferrari’s extreme sportiness has a genuinely worldwide appeal.

The main
Awards

Awards
Best Supercar of the Yea...

GQ

Awards
Car of the Year 2009

Top Gear

Design

Uncompromising design approach

Every Ferrari is the result of an uncompromising design approach that integrates styling and aerodynamic requirements.

experience 360°

DISCOVER THE 458 Italia

458 Italia’S cockpit

Functional and ergonomic design

The stylistic choices in the interior developed by Ferrari Centro Stile reflect the functional, ergonomic design of the cockpit. The driver is set in the centre of a streamlined, intuitive layout, very much in line with the marque’s signature styling cues.

The instrument panel consists of two leather-trimmed shells which outline the clean, overlapping forms from which the central aluminium structure emerges that house the instruments.

458 Italia’S cockpit

The styling of the steering wheel underscores a sense of continuity with classic Ferrari styling cues (such as the aluminium central pad), whilst representing at the same time innovation by eliminating the indicator and windscreen wiper stalks and clustering all of the controls on the steering wheel.

The centre console features a sculptural aluminium casting which houses the F1 gearshift panel and its dynamic controls: the Launch Control button, reverse, and the Auto switch to put the gearbox in automatic mode.

458 Italia’S BODYSHELL

Compact and  aerodynamic shape

The 458 Italia’s volumes have been honed to a compact and aerodynamic shape by Pininfarina and the Ferrari Centro Stile with the themes of purity, simplicity, technology, efficiency and lightness underpinning the concept.
It is unmistakably a Ferrari, incorporating the characteristics that have become a signature of every car that leaves Maranello. Yet it is also clearly a significant leap forwards from the sporty mid-rear V8 cars that preceded it.

458 Italia’S BODYSHELL

This was achieved by aiming for superb driveability in extreme conditions and ensuring that every last component was honed with performance and driving pleasure in mind.
Aerodynamic development in the wind tunnel aimed at sculpting the flanks and the tops of the rear wheelarches to naturally channel the air flow to the intakes above the tail. The gearbox and clutch oil radiators have been moved from the sill area to the rear of the engine compartment.

The car’s powerful character is underlined by the swage line along its flanks, rising from the rear of the front wheelarch before dropping half-way along the door to the rear wheelarch. The result is sleeker surfaces higher up and a characteristic scoop over the rear wheelarches.

458 Italia’S BODYSHELL

The nose features a single opening for the grille and two large air intakes to channel air to the engine radiators.

The central area has sections and profiles designed to direct the air to the radiators and the flat underbody, with the air to the latter being channelled through the middle of the bumper beneath the central dam.

The nose also sports two small aeroelastic winglets which deform at high speeds. Their main function is to generate downforce but they also improve cooling by channelling air to the radiators.

458 Italia’S BODYSHELL

The headlights are designed to give the 458 Italia a characteristic stance. The main lens is a rotating bi-xenon light with low- and fullbeam functions, which follows the car’s movements in line with the curves on the road. Above it is a vertical stack of 20 high-intensity LEDs for the DRLs or daylight running lights (their intensity increases with the intensity of daylight) and indicators.

The characteristic brake air intake is a natural, harmonious part of the intersection of the headlight, wheel arch and bonnet volumes. On top of the wing outside the headlights is a vent for radiator cooling.

458 Italia’S BODYSHELL

Below the characteristic rear nolder are two large air vents from the gearbox and clutch radiators with the prominent circular tail-light assemblies mounted on the edge of the wheelarches.

The car’s sills are characterised by two keel forms that act as fairings to the rear wheels, while the rear bodywork between the rear diffusers acts as the surround to the novel triple exhaust tail pipes, a styling cue that recalls the legendary F40 and clearly hints at the 458 Italia’s sporty character. As is traditional for Ferrari’s 8-cylinder sports cars, the engine can be seen through the rear screen.

458 Italia’S BODYSHELL

The exterior architecture focused on keeping weight down, reducing the frontal section to reduce drag, and on lowering the car’s centre of gravity.

The result of this mix is enhanced handling and roadholding as well as a correct ratio between the wheelbase, overhangs and front and rear track.

Innovations

Powertrain

Ferrari_458-Italia_engine

THE ENGINE IS A DRY-SUMP 90 DEGREE V8 WITH A DISPLACEMENT OF 4499 CC AND IS MID-REAR MOUNTED.

Read more

The design of the engine components has been influenced by the carry-over of racing technology

It is an entirely new design engineered to reach a maximum of 9,000 rpm – a first on a road car with this cylinder capacity – with a high 12.5:1 compression ratio and a maximum power output of 570 cv. This equates to an outstanding power output of 127 cv/l, a new benchmark for a naturally-aspirated production engine.
The generous torque available - 540 Nm at 6000 rpm, with over 80 per cent available from 3250 rpm – ensures rapid pick-up from all revs. The specific torque output of 120 Nm/l is another record.

The design of the engine components has been influenced by the carry-over of racing technology – F1 in particular – for maximum fluid-dynamic efficiency in order to achieve both performance and fuel consumption objectives, and meet the most stringent international emissions restrictions. The piston compression height was reduced as per racing engine practice. Similarly, thinner compression rings have been adopted to minimise friction between piston and liner. A graphite coating was applied to the piston skirt for the same reason.

TO HELP FURTHER REDUCE INTERNAL FRICTION, THE CYLINDER BLOCK HAS FOUR SCAVENGE PUMPS.

Two pick up oil from the cylinder heads and front and rear of the engine via dedicated oil recovery ducts outside the crankcase area, and two pick up oil from below the crank throws.

The recovery ducts of the latter are interconnected in two groups of four cylinders to optimise the scavenge function and create a strong vacuum (800 mbar) around the crankshaft.

This solution prevents excess oil splashing out of the sump and onto the rotating crankshaft and thus reduces power loss caused by friction. It also reduces losses due to windage caused by the pumping action of the pistons.
The engine oil pressure pump features variable displacement geometry which reduces the amount of power absorbed at high revs. Lowering the pump’s displacement actually increases the power available at the crankshaft for the same amount of fuel used.

As is traditional for Ferrari engines, the new V8 is equipped with continuously variable timing on both inlet and exhaust cams. The aluminium intake manifold has been lightened by reducing the wall thickness. It has short, almost straight inlet tracts to reduce losses and a system that varies the geometry of the manifold, optimising the volumetric efficiency throughout the rev range. This is achieved by incorporating three pneumatic throttle valves in the central section between the two plenums. The engine mapping provides four different configurations of the valves for optimum torque values at all revs.


The use of GDI with Split Injection improves engine performance by modulating the injection in two phases, increasing combustion efficiency and the torque at low revs (by up to 5 per cent).

A high injection pressure (200 bar) guarantees adequate pulverisation of the petrol and an optimal air/fuel mix right up to 9000 rpm. This feature again results in better performance and lower fuel consumption. The exhaust system was designed to provide the kind of thrilling soundtrack owners of Ferrari’s V8s are used to whilst also guaranteeing high levels of acoustic comfort. One of the main objectives with the exhaust was to reduce weight.

The catalytic converter is attached to the central section of the exhaust by a flexible element to reduce the amount of vibration transmitted and to thus allow thinner metal to be used. Similarly the pre-catalytic converter has been eliminated, lowering overall weight and reducing back pressure whilst still respecting strict Euro 5 and LEV2 emissions.


GEARBOX

The technology is based on the independent management of even and odd gears which are pre-selected using two separate input shafts. The gear shifting time (the overlap between the opening and closing phases of the two clutches) is zero and thus there is no interruption of engine torque to the driven wheels.

Compared to the California gearbox, response times have been reduced and the 458 Italia has specific, sportier gear ratios to match the power and torque curves of the new V8, guaranteeing high torque even at lower revs. The E-Diff 3 electronic differential has also been integrated into the gearbox, resulting in a more compact and lighter unit.

Architecture

The new chassis, once more in aluminium, incorporates aerospace industry-derived manufacturing and bonding techniques.

Read more

The modular chassis is an all-new design. New alloys join the traditional aluminium, along with high-resistance aluminium extrusions, developed by the aviation industry, and innovative manufacturing processes, such as heat-forming. The aim was to keep weight down to the benefit of performance and handling.

The result is a chassis with improved structural rigidity, with torsional rigidity up 15 per cent compared to the F430, and beam stiffness up 5 per cent.

Close
Ferrari_458-Italia_back-view

Aerodynamics

Ferrari_458-Italia_three-quarter-front-view_aerodynamics

EVERY FERRARI IS THE RESULT OF AN UNCOMPROMISING DESIGN APPROACH THAT INTEGRATES STYLING AND AERODYNAMIC REQUIREMENTS. THE PININFARINA DESIGN FEATURES COMPACT, AERODYNAMIC LINES, UNDERSCORING THE CONCEPTS OF PERFORMANCE-ORIENTED EFFICIENCY THAT INSPIRED THE PROJECT.

Read more

The nose features a single opening for the front grille and side air intakes, with aerodynamic sections and profiles designed to direct air to the coolant radiators and the new flat underbody. The nose also sports small aeroelastic winglets which generate downforce and, as speed rises, deform to reduce the section of the radiator intake and cut drag.

The oil radiators for the F1 gearbox and the dual-clutch are situated in the tail and air is fed from two intakes on the top of the rear wings. This solution provides a base bleed effect, an aerodynamic function that was developed by Ferrari for the FXX and which reduces drag by feeding the hot air out of the radiators under the nolder and into the slip stream.


Using experience gained in aerodynamic development on the Ferrari F430 GT2, the flat underbody now incorporates the air intakes for engine bay cooling. These are positioned ahead of the rear wheelarches where they use pressure differences to efficiently channel air flow to the engine bay, at the same time generating more rear downforce. The car's sills are characterised by two keel forms that act as fairings to the rear wheels, while the rear bodywork between the rear diffusers acts as the surround to the novel triple exhaust tail pipes, a styling cue that recalls the legendary F40 and gives the 458 Italia's tail an aggressive sporty stance. The engine, in mid-rear V8 Ferrari tradition, is visible below the engine cover.


Technical development of the car's shaped started using CFD (Computational Fluid- Dynamic) techniques which helped optimise the management and interaction of the internal flows prior to wind tunnel testing.

The latter was carried out on Ferrari's rolling road facility using modular 1:3 scale models. The final solution chosen ensured adequate cooling to the running gear, while, at the same time, achieving a high level of aerodynamic efficiency (1.09) through excellent drag and downforce figures (Cd 0.33 and Cl 0.36 respectively) with 140 kg of downforce at 200 km/h and no less than 360 kg at top speed.


The front-mounted coolant radiators are trapezoidal in shape and positioned to minimise the impact of the internal cooling flows on drag and downforce. The oil radiators for the gearbox and clutch are are situated in the tail with air fed from two intakes on the top of the rear wings. The hot air from the radiators creates a base bleed effect, venting into the car's low-pressure trail below the nolder and reducing drag.

The air intakes for engine bay cooling are situated on the aerodynamic underbody, where differences in pressure channel the air in the most efficient manner, and are positioned to increase rear downforce. Similarly air is channelled from the front air dam to the rear diffuser where the position and number of the fences has been developed to optimise the distribution of the vortex to improve rear downforce.

Close

vehicle dynamics

Ferrari_458-Italia_top view

SINCE THE BEGINNING OF 2008 BREMBO CARBON-CERAMIC BRAKES HAVE BEEN STANDARD ON ALL FERRARIS. THE 458 ITALIA IS NO DIFFERENT AND IS EQUIPPED WITH 6-POT ALUMINIUM CALLIPERS WITH 398 X 223 X 36 MM DISCS AT THE FRONT, AND 4-POT ALUMINIUM CALLIPERS WITH 360 X 233 X 32 MM DISCS AT THE REAR.

Read more

The 458 Italia boasts outstanding braking distances (100-0 km/h in 32.5 metres; 200- 0 km/h in 128 metres) thanks to the development and optimisation of the Bosch control logic and the evolution of Ferrari’s Pre-Fill logic, which reduces response times by activating the pistons in the callipers, thus minimising the gap between the brake pad and the disc as soon as the driver lifts off the accelerator. Similarly, these excellent results were achieved thanks to a specific calibration of the ABS for medium/high grip surfaces, and by integrating the ABS control logic with that of the E-Diff 3 to ensure a more accurate estimate of the vehicle speed and hence better braking torque control, as well as enhanced vehicle stability.


Suspensions

The 458 Italia's front suspension employs a novel new double wishbone set-up which features an L-shape design for the lower wishbone, with the rearward facing arm longer than the one in line with the wheel axis to provide greater longitudinal flexibility. This in turn improves the car's ability to absorb bumps and it also reduces suspension noise.

Another benefit is in terms of greater transverse rigidity which improves handling. The same characteristics are shared by the new rear multi-link suspension and, combined with specific tyre development, overall vertical rigidity has thus been improved (+35 per cent with respect to the F430) for less body roll, and the engineers were able to introduce a more direct steering ratio (11.9° compared to the F430's 16.9°, a reduction of 30 per cent) which makes for quicker and more responsive steering on both road and track.

The 458 Italia also features the latest, second-generation Magnetorheological Suspension Control shock absorber system. Compared to the system first introduced on the 599 GTB Fiorano, SCM2 boasts an evolved ECU (-50 per cent input time) and a damper force generation time of 8 ms compared to the 599's 15 ms.

There is also a new piston rod bushing in the damper which reduces internal friction (-35 per cent) for more precise small-bump control and improved ride comfort.

Vehicle controls

ON THE 458 Italia THE E-DIFF AND F1-TRAC CONTROL SOFTWARE ARE INTEGRATED
IN THE SAME ECU.

This minimises communication times between the two systems and, at the same time, the individual logics were evolved to improve vehicle performance.

A new Power On strategy has been developed for the E-DIff governing traction out of corners and is integrated with the F1-Trac logic, an evolution in the combined action of both systems which is also connected with the high-performance ABS control logic, which is specially set up for high-grip surfaces.

Read more

The electronic differential continuously distributes torque to the rear wheels, both in Power Off (turning in for the corner) and Power On (accelerating out of the corner), guaranteeing excellent vehicle stability and control in all driving conditions and on all surfaces.

The E-Diff 3 now works in a more integrated manner with the F1-Trac, using a series of F1-Trac parameters and evaluations (such as estimates of grip) both in manettino positions in which the F1-Trac is inserted (Sport – Race) and those in which it is deactivated (ESC Off and CST Off).


Compared to previous versions, E-Diff 3 delivers improved torque distribution coming out of corners (in Sport, Race, ESC Off and CST Off), which translates into improved grip, better roadholding and more progressive handling on the limit.

The result is an improvement of 32 percent in longitudinal acceleration out of corners compared to previous models and a lap time at Fiorano of just 1" 25 seconds.

Specifications

V8 ENGINE

THE NEW 4497 CC V8 IS THE FIRST FERRARI DIRECT INJECTION ENGINE TO BE MID-REAR-MOUNTED.

MAXIMUM POWER

419 KW

(570 CV)

at 9000 RPM

ACCELERATION 0-100KM/H

3.4 SEC

0-100km/h

SPECIFIC POWER OUTPUT

127 CV

/ litre

Type V8 – 90°
Total displacement 274.4 cu in (4497 cc)
Maximum power 419 kW (570 CV)** @ 9000 rpm
Maximum torque 398 lbs/ft (540 Nm) @ 6000 rpm
Specific power output 127 CV/l
Compression ratio 12.5:1
Front 235/35 ZR20 8.5”
Rear 295/35 ZR20 10.5”
Overall length 178.2 in (4527 mm)
Overall width 76.3 in (1937 mm)
Height 47.8 in (1213 mm)
Wheelbase 104.3 in (2650 mm)
Dry weight 3042 lbs (1380 kg)*
Weight/power ratio 7.16 lbs/kW (2,42 kg/CV)
Weight distribution fr/r 42%/58%
Maximum speed >202 mph (>325 km/h)
0-100 km/h <3.4 s
Fuel consumption*** 13.3/100 km
Emissions*** 307 g CO2/km
Gearbox Dual-clutch, 7-speed F1
Electronics E-Diff3, F1-Trac, high-performance ABS
* With forged wheels and Racing seats
** Including 5 CV of ram effect
*** Combined cycle (ECE+EUDC)