X

 

G

UEST

REGISTRATION

 

 

 

or

 

 
CREATE ACCOUNT

 

O

WNER

REGISTRATION

 

 
Do you own or did you order a Ferrari?
Register and gain access to the Owners' section, where you will find all the services dedicated you.
REGISTER NOW

 

O

WNER

REGISTRATION

 

 
Do you own or did you order a Ferrari?
Register and gain access to the Owners' section, where you will find all the services dedicated you.
REGISTER NOW
 
Ferrari 3.2 Mondial - 1985

Overview

3.2 Mondial

1985

The new 3.2 version of the Mondial offered a more powerful and flexible V8 that significantly improved the car’s performance. New, more efficient and elegant light clusters, a more ergonomic interior and better fit and finish completed the profile of this 2+2. It was comfortable and spacious, and offered excellent visibility for a car in its category.

Focus on

The Mondial 3.2 model succeeded the Mondial Quattrovalvole, and was available in both coupe and cabriolet form, being announced concurrently with the 328 series of 2 seat models at the 1985 Frankfurt Salon. The 3.2 in the model title referred purely to the cubic capacity of the engine in litres. When necessary, the 3.2 could turn in the kind of dynamic performance expected of a thoroughbred Ferrari.

Read more
Ferrari 3.2 Mondial - 1985
Ferrari 3.2 Mondial - 1985

The Body

This model saw the first change in the body styling, with revised front and rear ends incorporating smooth body colour bumper assemblies, and a radiator grille with front light and radiator grille assemblies that mirrored those of the 328 cousin. These revisions had the effect of producing a more instantly recognisable homogeneous range of eight cylinder models in the Ferrari catalogue.

The body shape remained otherwise unaltered from its predecessor, although once again the interior detailing was revamped, the most noticeable being angled top corners to the instrument nacelle.

A leather dashboard and/or headlining was available as an option.

The five spoke road wheel pattern changed from a flat spoke design to a convex spoke layout to accommodate negative offset suspension geometry for the optional ABS braking system, which would eventually become standard equipment. This resulted in an increase of 25mm and 50mm respectively, in the front and rear track.

Engine and Chassis

The main European market Mondial 3.2 coupé models had a tubular chassis with factory type reference F 108 CL 100, which featured a bolted rear sub-frame section, so that the complete engine, transmission and rear suspension assembly could be removed as a single unit, for ease of maintenance.

The V8 engine of the Mondial 3.2 was basically the same design as that used in the Mondial Quattrovalvole model, but fitted with Bosch K Jetronic fuel injection and Marelli MED 806A Microplex electronic ignition to produce a claimed 270bhp at 7000rpm for main European market models, and 260bhp for US market models. It was of a 90 degree configuration, with belt driven twin overhead camshafts per bank, having a total capacity of 3185cc, with a bore and stroke of 83mm x 73mm, bearing factory type reference F 105 C 000 for European market cars.

The engine was transversely mounted in unit with the all synchromesh five speed transmission assembly, which was below, and to the rear of the engine’s wet sump.

Ferrari 3.2 Mondial - 1985
Ferrari 3.2 Mondial - 1985

As with the concurrent 2 seater models right and left hand drive was available, together with various world market specification models.

From chassis number 75000, odd and even numbers were used for the road production cars, and Mondial 3.2 model production spanned this figure thus they have odd numbers up to this figure, and odd and even above it.

The model was produced in a total of 987 units from 1985 to 1989, in the chassis number range 58277 to 79671.

Careful selection of the best shots of the Mondial 3.2 in high definition. The photo gallery shows the distinctive features of this model Ferrari in 1985, focusing on the details and the most important parts.

Specifications

V8  Engine

Type rear, transverse, 90° V8
Bore/stroke 83 x 73.6 mm
Unitary displacement 398,22 cc
Total displacement 3185.76 cc
Compression ratio 9.8 : 1
Maximum power 199 kW (270 hp) at 7000 rpm
Power per litre 85 hp/l
Maximum torque 304 Nm (31 kgm) at 5500 rpm
Valve actuation twin overhead camshafts per bank, four valves per cylinder
Fuel feed Bosch K-Jetronic mechanical injection
Ignition Marelli Microplex electronic, single spark plug per cylinder
Lubrication wet sump
Clutch single-plate
Frame tubular steel
Front suspension independent, unequal-length wishbones, coil springs over telescopic shock absorbers, anti-roll bar
Rear suspension independent, unequal-length wishbones, coil springs over telescopic shock absorbers, anti-roll bar
Brakes discs
Transmission 5-speed + reverse
Steering rack-and-pinion
Fuel tank capacity 80 litres
Front tyres 205/55 VR 16
Rear tyres 225/55 VR 16
Type 2+2 coupé
Length 4535 mm
Width 1795 mm
Height 1235 mm
Wheelbase 2650 mm
Front track 1520 mm
Rear track 1510 mm
Weight 1410 kg (dry)
Top speed 250 km/h
Acceleration 0-100 km/h 7.4 sec
0-400 m 14.6 sec
0-1000 m 27.2 sec