X

 

G

UEST

REGISTRATION

 

 

 

or

 

 
CREATE ACCOUNT

 

O

WNER

REGISTRATION

 

 
Do you own or did you order a Ferrari?
Register and gain access to the Owners' section, where you will find all the services dedicated you.
REGISTER NOW

 

O

WNER

REGISTRATION

 

 
Do you own or did you order a Ferrari?
Register and gain access to the Owners' section, where you will find all the services dedicated you.
REGISTER NOW
 

Overview

THE MOST
POWERFUL
SERIES-PRODUCTION FERRARI
 

The F12berlinetta is not only the most aerodynamic series-production Ferrari, it is also the most powerful, highest performance front-engine Ferrari in the range.

The F12berlinetta delivers unparalleled performance. Its direct-injection, 6,262cc normally-aspirated V12 engine introduces a new generation of innovations, winning awards, building passion.

F12berlinetta
PHOTO GALLERY

Read more

Max power output of 731 hp

The F12berlinetta's V12 engine is just as much art for eyes as it is power source for the enthusiast. With a maximum power output of 731 hp at 8250 rpm, it also generates maximum torque of 508 lb-ft, yet 80 percent of that torque is available at a mere 2500 rpm. Outstanding response and strong acceleration rushes through anywhere and everywhere. Moreover, the V12's high specific power output of 116 hp per liter is a record for an engine of this type. Impressive by any standards, these stats make Ferrari's F12berlinetta the benchmark.


Dimensions and weight distribution

Shorter, lower and narrower than its predecessor, the 599 GTB Fiorano, the new F12berlinetta is more than a design success, it's a performance virtuoso and that is no accident. While weighing in at only 3362 pounds and also being 20 percent more torsionally rigid than its predecessor, the major focus in structural design is placing the major masses in the best locations. This improves the chassis' dynamic behavior at speed, in corners and under braking; no easy feat. The engine is lower in the chassis, netting a lower center of gravity. A new rear suspension / gearbox unit enables a smaller rear end. Weight distribution is therefore optimized for a slight rear weight bias, at 46 percent front / 54 percent rear.

The F12berlinetta also uses innovative materials and technologies new to the automotive industry. A spaceframe chassis and bodyshell employs more than twelve alloys to shave off 154 pounds when compared to the 599 GTB Fiorano.


Ferrari’s sports car ethos
takes on a new form

A modern take on classic design with new aerodynamic solutions

Sensuous design and aerodynamics - two automotive goals often at odds - are 100 percent synchronized in F12berlinetta. Pininfarina and the Ferrari Style Center exceed expectations with brilliant style and balanced proportions. Though it is largely original in looks, many signature elements from the grand Ferrari V12 history remain. Despite compact exterior dimensions, the F12berlinetta offers superb cabin space and comfort. Designers also left room for innovation. The F12berlinetta uses the smart Aero Bridge where the hood and front fenders meet to create downforce. In a similar vein, Active Brake Cooling opens air ducts only when the brakes reach a threshold temperature. The result is extreme aero efficiency, a fact borne out by the F12berlinetta's drag coefficient of just 0.299, while also generating 271 pounds of downforce at 125 mph.




T-shape: F1-inspired

The F12berlinetta employs a modern, functional reinterpretation of the Kamm tail, which seamlessly integrates the two vertical fences of the rear diffuser. The resulting original T-shape also incorporates two full-LED circular tail-lights and the F1-inspired rear fog light.

The F12berlinetta has the very latest carbon ceramic braking system (CCM3), a new "Evolution" magnetorheological suspension (SCM-E) and advanced vehicle dynamics systems (E-diff, ESC, F1-Trac and high-performance ABS). The controls for these systems are integrated in a single, faster ECU with software unique to the F12berlinetta.

Design

Expression of pure Ferrari DNA

The F12berlinetta is a perfect balance between aerodynamic efficiency and proportion.

360° EXPERIENCE

DISCOVER THE F12Berlinetta

F12berlinetta CABIN

Cutting-edge look:
understated, sophisticated

The F12berlinetta's interior provides both a sporty driving position and maximum comfort. Advanced technologies, sophisticated design and beautiful detailing perfectly illustrate Ferrari's dedication to the craft.

F12berlinetta CABIN

The logical, ergonomic layout of vital functions within the cockpit mark the interior design's strongest characteristic. The essential architecture embraces and enhances the driver interface and displaying all pertinent information directly ahead. The tunnel console is both light and functional while the central bridge - a signature interior element - incorporates Ferrari's famed F1 gearbox, warning lights and switchgear.

F12berlinetta CABIN

Designers intently focused on making the F12berlinetta's seats as trim as possible to increase freedom of movement within the cabin while attaining even greater comfort during steady-state driving. Simultaneously, they restrain lateral movement due to cornering forces during aggressive driving.

Headrests are fully integrated into the backrests, giving the seats a very modern, track-inspired look.

An upholstered bench in the rear offers leather luggage straps to hold bags securely in place.

F12berlinetta BODYWORK

BETWEEN
SPORTINESS &
EFFICIENCY

The F12berlinetta’s design strikes the perfect balance between maximum aerodynamic efficiency and the elegant proportions typical of front-engine V12 Ferraris. Designers and engineers collaborated to sculpt beautiful surfaces that seamlessly incorporate innovative aerodynamic function, rather than overlaying different appendages. The result is an innovative system of channeling air flow that makes the F12berlinetta completely original. It's a true marriage of technology and aesthetics and a requisite achievement for all Ferraris in which form and function are intertwined.

F12berlinetta BODYWORK

The F12berlinetta's low coupé lines and powerfully sculpted flanks curve and dip to channel airflow off the hood. Two aerodynamic tunnels between the front wheel arches and the A-pillars called "air bridges" direct airflow off the hood to the F12berlinetta's side surfaces. The air then flows into scoops in the flanks.

F12berlinetta BODYWORK

An imposing grille dominates the front end and draws in air to cool the V12 engine. Electronically-controlled flaps on either side of the grille open at pre-determined threshold brake temperatures to provide optimal cooling of brake components. At normal operating temperatures, the flaps remain closed, minimizing aerodynamic drag.

The F12berlinetta's rear employs a modern, functional reinterpretation of the classic Kamm tail which elegantly integrates the two vertical fences of the rear diffuser. The resulting original T-shape also incorporates two full-LED circular tail-lights and the F1-inspired rear fog light.

Innovations

Powertrain

Ferrari_F12berlinetta_engine

THE MOST POWERFUL NATURALLY-ASPIRATED V12 YET

Read more

SPECIFIC POWER OUTPUT RAISES THE RECORD FOR NATURALLY-ASPIRATED FERRARI ENGINES TO 116 HP PER LITER

The F12berlinetta's maximum power of 731 hp at an operatic 8250 rpm is also accompanied by remarkable flexibility. A healthy 80 percent of the maximum 508 lb-ft of torque is available from merely 2500 rpm. This powerplant also records a specific output - horsepower relative to displacement - of 116 hp per liter. Naturally, the net effect is massive maximum acceleration at low speeds right up to the 8700 rpm redline.

Just like Ferrari's F1 engines, this production V12 operates with very low friction and inertia to ensure that revs climb rapidly. To heighten this quick-revving character, Ferrari concentrated on a number of areas including oil control, valvetrain drag and the compression ratio which rises to 13.5:1. An innovative ignition system fires three successive sparks of different intensity and duration over the time that a normal ignition system fires once. This helps reduce fuel consumption by 30 percent compared to the 599 GTB Fiorano, despite the increase in power and torque. The lower crankcase is completely new and yields a markedly lower center of gravity than the F12berlinetta's predecessor. The engine not only sits 1.1 inches lower than in the 599 GTB Fiorano, but further back in a fore-aft plane, making the car's mass even more centralized. The V12 feeds power to the rear wheels through the racing-derived dual-clutch F1 transmission which gives instantaneous gear shifts.

TRANSMISSION AND ELECTRONIC E-DIFF REDUCE OVERALL WEIGHT

The F12berlinetta's transmission not only responds rapidly to input in the name of performance, it contributes to dynamic behavior by being lighter. Very close gear ratios in the dual-clutch F1 gearbox make the best use of the V12 engine's power and torque spread at high and low rpms. The electronic E-Diff mated to the transmission was developed along the same weight-conscious mind-set.

Close

Architecture

THE F12BERLINETTA’S SPACEFRAME CHASSIS AND BODYSHELL ARE COMPLETELY NEW AND USE MATERIALS DEVELOPED IN AERONAUTICS AND AEROSPACE

Read more
Ferrari_F12berlinetta_front-three-quarter-view

MULTIPLE ALLOYS - 12 IN ALL - INCLUDE TWO NEW STRUCTURAL MATERIALS

Breakthrough use of new alloys keeps the F12berlinetta's weight down. Ferrari has pared 110 pounds from the bodyshell alone. And if one considers the additional weight that would have been required to meet heightened safety regulations to the previous model, the equivalent weight loss is even greater, at 198 pounds. Torsional rigidity has also been improved, increased by 20 percent. Crash resistance is already in line with future requirements. Also, particular attention was taken to improve production quality, to minimize repair times and therefore reducing repair cost.


SCINTILLATING PERFORMANCE AND ENGAGING DRIVING FEEL THANKS TO AN ADVANCED, AMBITIOUS TRANSAXLE

THE F12BERLINETTA DELIVERS TRULY EXTRAORDINARY PERFORMANCE AND DRIVING INVOLVEMENT THANKS TO ITS HIGHLY EVOLVED TRANSAXLE ARCHITECTURE WHICH WAS DEVELOPED WITH EXTREMELY AMBITIOUS OBJECTIVES IN MIND.
Every part and every system in the F12berlinetta was placed under a weight-savings microscope. Furthermore, placement of weight in the chassis is just as vital. The engineers' objective was to move mass rearward. With a front-to-rear weight distribution of 46/54 percent, success is achieved. Frontal area is also reduced, helping aerodynamics.

The F12berlinetta's rear bodywork is now more compact as a result of the new transaxle, multi-link rear suspension, electronic differential and repositioning and diminishing the fuel tank size. There is no compromise in driving range, though; this is unaffected thanks to greater fuel efficiency.

Rather than a traditional separate trunk, the F12berlinetta features a generous tailgate which contributes to much greater luggage space and easy accessibility. Structural integrity is in no way compromised, borne out by the 20 percent increase in rigidity over the 599 GTB Fiorano.

This component packaging solution also ensures that more mass sits within the wheelbase, improving handling dynamics. Rear overhang is greatly reduced by 3.2 inches, while front overhang is extended by 2.5 inches to accommodate the cooling systems required for the powerful V12 engine.

The end result is a 154-pound loss (compared to the 599 GTB Fiorano) when weighed as a whole, with a .9-inch lower center of gravity. It’s also shorter by 1.8 inches, lower by 2.4 inches and narrower by .7-inch, compared to the previous V12 coupé.

Aerodynamics

Ferrari_F12berlinetta_lateral view

F12BERLINETTA SHAPE: CREATED BY BOTH HUMAN HAND AND BY WIND TUNNEL SCIENCE

Read more

OVER 250 HOURS IN WIND TUNNEL RESEARCH AND COMPUTATIONAL FLUID DYNAMICS MODELING NEVER LOOKED AS BEAUTIFUL

The aerodynamic development of the F12berlinetta ran hand-in-hand with styling in the studio by Ferrari designers. The result is the most aerodynamically efficient Ferrari ever, and a model of aggressive beauty that furthers exotic design. Downforce increases by 7 percent to 271 pounds at 124 mph (over the 599 GTB Fiorano), while drag is significantly reduced to a Cd of just 0.299.

Ferrari_F12berlinetta_front-three-quarter-view

A series of innovative features enables the F12berlinetta’s exceptional aerodynamic efficiency. The Aero Bridge uses the hood to create downforce. Air passing over the car is drawn into special air intakes in the rear fenders, altering pressure in the wheel wells before exiting through the rear diffuser.

The front splitter is now separate from the fascia and actually generates downforce while directing air to the rear extractor, improving efficiency, while the underbody panels provide a flat surface with minimal turbulence and drag. The generous rear diffuser and its four fences also contribute an increase in downforce.


ACTIVE BRAKE COOLING AND AIR MANAGEMENT

Active Brake Cooling vanes on the front brake air ducts open only if brake operating temperatures are very high. When brake temperatures are normal, these vanes remain closed, providing greater aerodynamic efficiency.

The hood's central air vent increases the efficiency of the cooling system and lessens the impact of air, lifting much of it over the windshield at high speed.

Close

Vehicle dynamics

Ferrari_F12berlinetta_three-quarter-posterior-view

THE HIGHEST-PERFORMANCE FRONT-ENGINE FERRARI EVER

Read more

RECORD-SETTING PACE, YET FLUID TO DRIVE

The F12berlinetta sets a blistering pace at Ferrari's private Fiorano test track, lapping the circuit in just 1 minute, 23 seconds. It also posts acceleration from 0-62 mph in only 3.1 seconds. Beyond the pure performance figures, though, it is fluid and intuitive to drive with confidence-inspiring handling at all speeds, not just at the limit on the racing circuit. The chassis' optimized layout with highly centralized mass, a very low center of gravity and far lighter overall weight compared to the 599 GTB Fiorano enable this agility and responsiveness, even at slower speeds.

All of the F12berlinetta's key mechanical parts and sub-systems like springs, dampers, wheels, tires, yaw control, the E-Diff, F1-Trac traction control, stability control and the EBD auxiliary braking system are integrated to achieve these performance figures with no compromise to occupant comfort.

The CCM3 carbon-ceramic braking system, itself new, features a new material mix for the rear pads. Together with Active Brake Cooling at the front, these improvements eliminate fade and deliver excellent stopping distances, shortened to 429 feet from 124 mph, an impressive 22-foot improvement over the 599 GTB Fiorano.

STATE OF THE ART DOUBLE WISHBONE SUSPENSION

As has been a Ferrari hallmark for years, the F12berlinetta uses the most sophisticated double wishbone suspension design. The front lower wishbones are L-shaped while the rear uses a multi-link arrangement that keeps geometry as perfect as possible throughout the rear wheels' travel. The F12berlinetta's suspension also sports new SCM-E magnetorheological dampers which have twin solenoids and a new ECU with more powerful software. The key to this system is the fluid inside the dampers. The fluid's viscosity is altered instantaneously by an electromagnetic field generated inside the damper. This translates into faster response time and more precise bump control which improves both performance and ride comfort.


ON-BOARD EXPERIENCE

CUTTING-EDGE, UNDERSTATED AND SOPHISTICATED

Read more

INTERIOR SPACE ENSURES THE DRIVING EXPERIENCE IS BOTH SPORTY AND COMFORTABLE - SIMULTANEOUSLY

The perfect balance is struck between advanced technologies and the beautifully hand-executed detailing of the Frau leather interior, reflecting the core Ferrari values.

The logical, ergonomic architecture of vital functions within the cockpit enhance the human-machine interface. All the major controls are on the steering wheel and all the main information is displayed in the binnacle straight ahead.

Eliminating stalks for turn indicators and other equipment, plus the clustering of all driver commands on the steering wheel underscore the car’s link to racing. The fact that the driver can reach every single control with hands firmly on the steering wheel rim, plus more ergonomically efficient F1 shift paddles maximize achievable performance in any driving condition.

The dashboard's new air vents show a new and innovative design inspired by aeronautics. Compact, they are made from carbon-fiber and aluminum alloy.

An optional information display for the passengers' side of the dash keeps them actively involved in the driving experience.

The central bridge incorporates the F1 gearbox and hazard warning light buttons, and is one of the cabin’s signature elements. An adjustable armrest opens to a hidden storage compartment housing a USB port.

The F12berlinetta’s door panels have a certain fluidity, and are designed around the logical arrangement of their main features: armrest, door handle, stereo speakers, airbag and leather pocket. Clients can personalize the finish and materials in the panel’s central section. Options include aluminum borders around the panel.

The F12berlinetta’s racing manettino emphasizes sporty driving on high-grip surfaces, offering drivers adjustment to the electronic driver assistance systems. On the dashboard, the right-hand satellite pod houses controls for the corresponding TFT screen which displays infotainment information. The controls for navigation, audio, Bluetooth and voice activation are based here, as well. Smartphones can connect to the internet to listen to web radio, podcasts and to download apps.


VEHICLE DYNAMIC ASSISTANCE, CAR STATUS, POTENTIAL PERFORMANCE

The left-hand instrument pod houses all dynamic assistance functions and provides real-time evaluation of the F12berlinetta's status and potential performance. When in RACE, CT-Off and ESC-Off manettino modes, this display makes driving even more involving as well as safer by informing the driver of the optimal conditions for the car at all times.

Levels of lateral acceleration, longitudinal acceleration (which includes braking), road speed and engine revs combine with a special algorithm that also employs temperature information from brakes, tires and the engine. Using all this data, the system estimates the car’s status and alerts the driver to conditions using the following messages:

  • WARM UP FURTHER WARMING OF COMPONENTS IS REQUIRED
  • GO OPTIMAL CONDITIONS FOR MAXIMUM PERFORMANCE
  • OVER OVERHEATING, COMPONENTS MUST BE ALLOWED TO COOL DOWN

Ferrari reduced the bulk of the F12berlinetta's seats as much as possible to provide far more space for occupant movement within the cabin. They are simultaneously far more comfortable than in the previous V12 coupe, yet offer lateral support fully commensurate with the very high handling and grip levels possible in the F12berlinetta. The headrest is fully integrated into the backrest, giving the seat a very modern, track-inspired feel.

The rear of the cockpit features an upholstered bench with leather luggage straps to hold bags securely. Occupant space is generous with seats designed for individuals up to six feet, four inches tall. There's ample trunk space, at 11.3 cubic feet. Luggage space can also expand to 17.7 cubic feet by lowering the bench panel, swallowing everything a couple would need for a longer journey.

Specifications

V12 ENGINE

THE F12 BERLINETTA'S 6262cc V12 DELIVERS ASTONISHING PERFORMANCE AND RPMs

Maximum power

731 hp

(SAE NET)

at 8250 RPM

acceleration 0-62 MPH

3.1 sec

weight: power

4.6 lbs.

per hp

Length 181.8 in
Width 76.5 in
Height 50.1 in
Wheelbase 107.1 in
Front track 65.6 in
Rear track 63.7 in
Dry weight* 3362 lb
Kerb weight* 3593 lb
Weight distribution 46% front, 54% rear
Fuel tank 24.3 US gal
Front 255/35 ZR 20 9.5J
Rear 315/35 ZR 20 11.5J
Front (winter) 255/35 ZR 20 9.5J
Rear (winter, can be used with chains) 305/35 ZR 20 11.5J
Type 65° V12
Bore/stroke 3.7 x 2.96 in
Compression ratio 13.5:1
Horsepower ** 731 bhp at 8250 rpm
torque 508 lbs/ft at 6000 rpm
Maximum revs 8700 rpm
Front 15.7 x 8.8 x 1.5 in
Rear 14.2 x 9.2 x 1.3 in
ESC Electronic Stability Control
High-performance ABS/EBD High performance Antilock Braking System/Electronic Brakeforce Distribution
F1-Trac F1 traction control
E-Diff 3 Third Generation of Electronic differential
SCM-E with dual coil (magnetorheological suspension control with dual coil system)
Maximum speed over 211 mi/h
0-62 mi/h 3.1 sec
0-124 mi/h 8.5 sec
City 11 mpg
Highway 16 mpg
Combined 563.2 g/mi

Multimedia