The Ferrari Challenge is an ever-youthful championship, fresh and full of energy, a series which over the course of its 22 years has known how to renew itself regularly, to become ever more interesting.
This season all the stages of the three Ferrari Challenge will be played with the 488 Challenge, the first equipped with a turbo engine to get on track in the Ferrari one-make series is the most powerful car in the Challenge history thanks to 670 hp from the V8 3, 9-liter engine derived from the 488 GTB, winner of the International engine of the Year Award in 2016.Read more
Compared to the production 488 GTB V8, the Challenge’s powertrain features specific engine mapping, optimised for racing performance, and shorter gear ratios providing up to an 11.6% increase in acceleration out of turns compared to the naturally-aspirated 458 Challenge EVO.
The F1 DCT transmission features a new racing shift strategy which enables the car to accelerate from a standstill to maximum revs in 4th gear in just six seconds. Further improvements include a reduction in overall powertrain weight, with 19.7 kg being shaved off the engine and a further 8.5 kg off the exhaust system.
Ferrari’s patented Slip Slip Angle Control software makes its first ever appearance on a Challenge car, improving the longitudinal acceleration through bends by 4.2%. A further significant development is the decoupling of the manettino function regulating the electronic vehicle dynamic controls. Rather than a single manettino intervening on all aspects of the software, the functions have been separated into two, either side of the steering wheel. The right-hand manettino (TC1) governs the level of intervention required based on the levels of grip, while the left-hand one (TC2) controls the degree of intensity of intervention. The result is a more tailored degree of integration between the driver and the car, governing when and how torque is delivered to the rear wheels and enhancing the performance of the car and the driver’s consistency.
The most noticeable changes to the 488 Challenge compared to the production car regard the aerodynamics. To achieve the technical objective of increasing the car’s aero efficiency while respecting the design, the engineers worked closely with the Ferrari Styling Centre. The front radiator layout was reworked, inverting the rake so that they are now inclined towards the rear. This solution improves the air flow over the radiators in racing conditions whilst, at the same time, reducing drag. The new layout required new vents at the bottom of the bumper ahead of the wheels.
The front bumper itself has been completely redesigned with a more pronounced splitter and flicks to increase downforce and balance the rear load, for a 7% improvement in efficiency compared to the 458 Challenge EVO.
The front bonnet is all new with triple vents and integrated flaps to direct the hot airflow from the radiators rearwards. To increase stability at high speeds, the 488 Challenge features a bigger rear wing, with an air foil similar to that used on the 2016 FIA World Endurance Championship-winning 488 GTE, which alone increases efficiency by 9% compared to the 458 Challenge EVO. The intakes on the rear flanks now take cooling air to the rear brakes, optimising downforce, while the engine air intakes are now positioned laterally under the rear spoiler, taking advantage of the high pressure generated in this area.
New and High performance levels
|Overall lenght||180,6 IN|
|Overall width||76,6 IN|
|Front Track||68,5 IN|
|Rear Track||65,1 IN|
|Dry Weight||2954 LB|
|Fuel Tank Capacity||33,3 US GALLON|
|Front||15.7 X 1.5 HT2 IN|
|Rear||15.0 X 1.3 IN|
|Type||V8 - 90° - Turbo|
|Bore Stroke||3.4 X 3.3 IN|
|Total Displacement||238,1 CU IN|
|Maximum Power||493 @ 8000 RPM KW|
|Maximum Torque||561 @ 3000 RPM LB FT|
News, videos and photos of all our competitions around the world. All you have to know about our cars, our teams and drivers.